Changes to Step #8
Edit by Matthew Vaught —
Edit approved by Matthew Vaught
- Before
- After
- Unchanged
Step Lines
[* black] [* black] Carefully apply a small amount of solder to hold the wire in place. [* black] Repeat this for each wire. [* icon_reminder] Make sure to reference the mapping of wires to connection points that you created in Step 4. |
[* black] [* black] Carefully apply a small amount of solder to hold the wire in place. [* black] Repeat this for each wire. [* icon_reminder] Make sure to reference the mapping of wires to connection points that you created in Step 4. |