Skip to main content

Fix Your Stuff

Right to Repair

Store

Changes to Step #4

Edit by Ron Davis

Edit approved by Ron Davis

Before
After
Unchanged

Step Lines

[* black] Turn on the multimeter and set it to measure resistance.
[* black] Select a wire and touch one of the multimeter leads to the soldered tip.
[* black] Touch the other multimeter lead to each of the segments on the headphone jack until the multimeter indicates that the wire is connected.
[* blackicon_reminder] Make sure to record what wire is connected to what pole of the jack.
[* black] Repeat the process for each wire.
[* blackicon_reminder] Make sure to record what wire is connected to what pole of the jack.
[* black] Repeat the process for each wire.