Skip to main content

Changes to Step #8

Edit by Andrew Bookholt

Pending approval

Deleted
Added
Unchanged

Step Lines

[* black] To remove the hard drive, unscrew the two small black Phillips screws holding the black plastic hard drive bracket to the chassis. Pull up on the white plastic tab and removelift the hard drivedrive out of the case, being careful not to strain the SATA cable.
[* black] To remove the hard drive, unscrew the two small black Phillips screws holding the black plastic hard drive bracket to the chassis. Pull up on the white plastic tab and removelift the hard drivedrive out of the case, being careful not to strain the SATA cable.
[* black] Carefully disconnect the Serial ATA cable.