Skip to main content

Changes to Step #8

Edit by Walter Galan

Pending approval

Deleted
Added
Unchanged

Step Lines

[* black] To remove the hard drive, unscrew the two small Phillips screws holding the black plastic hard drive bracket to the chassis. Pull up on the white plastic tab and lift the hard drive out of the case, being careful not to strain the SATA cable.
[* black] Carefully disconnectingdisconnect the Serial ATA cable.
[* black] Carefully disconnectingdisconnect the Serial ATA cable.

Image 2

Old Version

New Version

Image 3

Old Version

New Version