Skip to main content

Changes to Step #4

Edit by kdubwi

Edit approved by Andrew Optimus Goldheart


Step Lines

[* icon_note] There are four retaining clips on each side of the iPod. An iPod opening tool will be used to separate the plastic front from the metal back of the iPod.
[* black] Insert the iPod opening tool into the left side of the iPod, with the edge of the tool pointing towards the metal back.
+[* black] A small guitar pick can be extremely helpful in opening the iPod. Simply insert it and slide the pick around the case to free the clips to streamline the process.
[* black] Gently enlarge the existing crevice by wiggling the iPod opening tool and moving it to the left.
[* black] Continue doing so until the entire side of the iPod is loose.
[* black] You can then insert an iPod opening tool to the right of the Hold button. Be very careful while inserting the tool, as the display is very fragile.