Skip to main content

Changes to Step #4

Edit by taras

Edit approved by Jake Devincenzi

Before
After
Unchanged

Step Lines

-[* icon_note] There are five retaining clips on each side of the iPod. An iPod opening tool will be used to separate the plastic front from the metal back of the iPod.
+[* icon_note] There are four retaining clips on each side of the iPod. An iPod opening tool will be used to separate the plastic front from the metal back of the iPod.
[* black] Insert the iPod opening tool into the left side of the iPod, with the edge of the tool pointing towards the metal back.
[* black] Gently enlarge the existing crevice by wiggling the iPod opening tool and moving it to the left.
[* black] Continue doing so until the entire side of the iPod is loose.
-[* black] You can then insert an iPod opening tool near the Hold button. Be very careful while inserting the tool, as the display is very fragile.
+[* black] You can then insert an iPod opening tool to the right of the Hold button. Be very careful while inserting the tool, as the display is very fragile.