Skip to main content

Changes to Step #4

Edit by Walter Galan

Pending approval

Before
After
Unchanged

Step Lines

-[* icon_note] There are five retaining clips on each side of the iPod. The large iPod opening tool will be used to separate the plastic front from the metal back of the iPod.
-[* black] Insert the large iPod opening tool into the left side of the iPod, with the edge of the tool pointing towards the metal back.
-[* black] Gently enlarge the existing crevice by wiggling the large iPod opening tool and moving it to the left.
+[* icon_note] There are five retaining clips on each side of the iPod. An iPod opening tool will be used to separate the plastic front from the metal back of the iPod.
+[* black] Insert the iPod opening tool into the left side of the iPod, with the edge of the tool pointing towards the metal back.
+[* black] Gently enlarge the existing crevice by wiggling the iPod opening tool and moving it to the left.
[* black] Continue doing so until the entire side of the iPod is loose.
-[* black] You can then insert the small iPod opening tool near the Hold button. Be very careful while inserting the tool, as the display is very fragile.
+[* black] You can then insert an iPod opening tool near the Hold button. Be very careful while inserting the tool, as the display is very fragile.