Skip to main content

Changes to Step #4

Edit by Miroslav Djuric

Pending approval

Before
After
Unchanged

Step Lines

-[* icon_note] There are five retaining clips on each side of the iPod. The large iPod opening tool will be used to separate the front side from the back side of the iPod.
-[* black] Insert the large iPod opening tool into the left side of the iPod and gently enlarge the existing crevice with the tool. Continue doing so until the entire side of the iPod is loose.
-[* black] Continue opening the left side of the iPod by using the large iPod opening tool.
+[* icon_note] There are five retaining clips on each side of the iPod. The large iPod opening tool will be used to separate the plastic front from the metal back of the iPod.
+[* black] Insert the large iPod opening tool into the left side of the iPod, with the edge of the tool pointing towards the metal back.
+[* black] Gently enlarge the existing crevice by wiggling the large iPod opening tool and moving it to the left.
+[* black] Continue doing so until the entire side of the iPod is loose.