Skip to main content

Changes to Step #1

Edit by Jake Devincenzi

Pending approval

Before
After
Unchanged

Step Lines

[* black] Starting at the bottom right corner, insert the flat end of a spudger between the touchscreen and LCD frame and gently pry the touchscreen off the LCD.
-[* icon_caution] Do not run the spudger down the side of the display assembly to loosen the touchscreen. The two components of the display assembly are held together by a fairly week adhesive tape, and running the spudger between the two could tangle or damage the tape.
+[* icon_caution] Do not run the spudger down the side of the display assembly to loosen the touchscreen. The two components of the display assembly are held together by a fairly weak adhesive tape, and running the spudger between the two could tangle or damage the tape.
[* black] Insert the spudger into the top right corner between the two pieces and pry the touchscreen off the LCD frame.