Fix Your Stuff

Right to Repair

Store

Changes to Step #2

Edit by Ron Davis —

Edit approved by Ron Davis

Before
After
Unchanged

Step Lines

[* black] Pry the battery out of the casing using a plastic spudger.
[* black] Pry the battery out of the casing using a plastic spudger.
[* icon_note] If the battery is hard to pry out, you may need to first apply some heat from the back of the cover using a heat gun or iOpener.
[* icon_reminder] When inserting a new battery, new adhesive or tape may be needed to secure it in place.
[* icon_caution] Work carefully. Li-ion batteries can react violently if punctured.
[* icon_caution] Work carefully. Li-ion batteries can react violently if punctured.