Skip to main content

Changes to Step #3

Edit by Noah Newman

Edit approved by Noah Newman

Deleted
Added
Unchanged

Step Lines

[* red] Remove five black 10 mm Phillips #0 screws from the back side of the device.
[* orange] Remove two silver-colored 5 mm screws using a PhillipsPhillips screwdriver. The screws are located on the left side of the internal cover.
[* orange] Remove two silver-colored 5 mm screws using a PhillipsPhillips screwdriver. The screws are located on the left side of the internal cover.
[* black] Remove the accompanying plastic tabs under the screws.
[* black] Gently pull off the back cover from the device.