Skip to main content

Changes to Step #3

Edit by Ron Davis

Edit approved by Ron Davis

Deleted
Added
Unchanged

Step Lines

[* red] Remove 5 blackfive black 10 mm Phillips #0 screws (1cm | PH0 screwdriver) from the back panelside of the device.
[* orange] You must also remove 2Remove two silver-colored screws (.5cm | PH0 screwdriver).5 mm Phillips from the left side of the internal cover.
[* black]
Remove the accompanying plastic tabs under the screws.
[* red] Remove 5 blackfive black 10 mm Phillips #0 screws (1cm | PH0 screwdriver) from the back panelside of the device.
[* orange] You must also remove 2Remove two silver-colored screws (.5cm | PH0 screwdriver).5 mm Phillips from the left side of the internal cover.
[* black]
Remove the accompanying plastic tabs under the screws.
[* black] Gently pull off the back cover from the device.