Skip to main content

Changes to Step #20

Edit by Luke Soules

Pending approval


Step Lines

[* black] The display assembly is attached to the case with 19 small screws:
[* red] Four (relatively) large Torx which screw into the hinges.
[* orange] Thirteen #00 Phillips which hold down the clutch cover.
[* yellow] And two #00 Phillips which screw into cable ground loops.
[* black] Apple made no compromises on the Air's display. Amazingly, the entire display assembly weighs only 465 g (slightly more than a pound), 34 percent less than the functionally-equivalent display assembly on the MacBook.

Image 1

No previous image