Skip to main content

Changes to Step #2

Edit by Andrew Optimus Goldheart

Edit approved by Andrew Optimus Goldheart

Deleted
Added
Unchanged

Step Lines

[* black] In the center ofred] Pull the panel, along side the hardoptical drive is the optical drive's thermal sensor connector. Pull the connector outstraight up from its socket on the logic board pullingboard. Pull parallel to the surfaceboard.
[* black] In the center ofred] Pull the panel, along side the hardoptical drive is the optical drive's thermal sensor connector. Pull the connector outstraight up from its socket on the logic board pullingboard. Pull parallel to the surfaceboard.