Skip to main content

Fix Your Stuff

Right to Repair

Store

Changes to Step #3

Edit by Walter Galan

Pending approval

Before
After
Unchanged

Step Lines

[* black] Lift the free end of the SD board to clear the plastic optical drive fan body, then pull it away from the edge of the outer case case to clear the two mounting pins.
[* icon_reminder] When reinstalling the SD board, first position its right edge on the pins molded into the right side of the outer case. Then carefully push the SD board down into its recess, being careful not to break and SMDany Surface Mount Device components off the board's left edge.
[* icon_reminder] When reinstalling the SD board, first position its right edge on the pins molded into the right side of the outer case. Then carefully push the SD board down into its recess, being careful not to break and SMDany Surface Mount Device components off the board's left edge.