Skip to main content

Changes to Step #22

Edit by David Lyke

Edit approved by Jeff Suovanen

Before
After
Unchanged

Step Lines

[* black] Remove the logic board from the outer case, minding any cables that may get caught.
-[* icon_note] When reinstalling the logic board, plug in a thunder port cable and a USB cable into the outer USB port before tightening the logic board screws to ensure proper alignment.
+[* icon_note] When reinstalling the logic board, plug in a thunderbolt cable and a USB cable into the USB port closest to the headphone/microphone ports before tightening the logic board screws to ensure proper alignment.