Skip to main content

Changes to Step #13

Edit by Andrew Bookholt

Pending approval

Before
After
Unchanged

Step Lines

-[* black] Insert wisdom here.
+[* black] Remove the following four screws:
+ [* red] One 9.3 mm T10 coarse-threaded screw
+ [* orange] One 25 mm T10 coarse-threaded screw
+ [* yellow] Two 22 mm fine-threaded screws
+[* black] Pull the upper right and lower left corners of the power supply away from the rear case to dislodge the mounting posts attached to the power supply's corners.

Image 1

Old Version

New Version