Skip to main content

Changes to Step #4

Edit by Glen Harbord

Edit declined by Andrew Optimus Goldheart

Before
After
Unchanged

Step Lines

[* black] Use the flat end of a spudger to pry all three AirPort antenna connectors up from their sockets on the AirPort board.
-[* icon_reminder] During reinstallation, connect the cable with no stripes to the socket marked CH0, the cable with one stripe to CH1, and the cable with two stripes to CH2.
+[* icon_reminder] During reinstallation, connect the cable with no stripes to the socket marked CH2 the cable with one stripe to CH1, and the cable with two stripes to CH0