Skip to main content

Changes to Step #2

Edit by Jeff Suovanen

Edit approved by Jeff Suovanen

Deleted
Added
Unchanged

Step Lines

[* black] Slightly lift the top edge of the display out of the outer case.
[* icon_caution] Do not lift it too much. There are several cables attaching the display to the logic board.
[* black] '''Warning!'''
Twisting or pulling the display assembly with the cables attached tends towill damage the cable and/or logic board connector. It is strongly advised to follow the guide disconnecting themyour iMac.
[* icon_caution] Do not lift it too much. There are several cables attaching the display to the logic board.
[* black] '''Warning!'''
Twisting or pulling the display assembly with the cables attached tends towill damage the cable and/or logic board connector. It is strongly advised to follow the guide disconnecting themyour iMac.