Changes to Step #4
Edit by Andrew Bookholt —
- Before
- After
- Unchanged
Step Lines
| - | [* red] Remove the two Phillips screws securing the AirPort/Bluetooth board housing. |
|---|---|
| + | [* black] Remove following two screws: |
| + | [* red] One 8.6 mm Phillips screw |
| + | [* orange] One 3.9 mm Phillips screw |
| [* black] Carefully rotate the AirPort/Bluetooth board housing (with AirPort/Antenna cables still attached) out of the lower case. |
Image 1
Old Version
New Version