Skip to main content

Changes to Step #1

Edit by Andrew Bookholt

Pending approval

Deleted
Added
Unchanged

Step Lines

[* black] Disconnect the camera cable by pulling its connector away from theits socket on the logic board.
[* icon_caution] Do not lift up on the cable as you disconnect it from the logic board. Pull the cable parallel to the face of
the logic board.
[* black] Disconnect the camera cable by pulling its connector away from theits socket on the logic board.
[* icon_caution] Do not lift up on the cable as you disconnect it from the logic board. Pull the cable parallel to the face of
the logic board.