Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Changes to Step #15

Edit by Andrew Bookholt

Pending approval

Before
After
Unchanged

Step Lines

[* black] Insert wisdom hereCarefully lift the logic board assembly from its left side and work it out of the upper case, minding the optical drive cable and the I/O ports that may get caught during removal.
[* black] If necessary, use the flat end of a spudger to separate the microphone from the upper case.
[* black] Pull the I/O port side of the logic board away from the side of the upper case and remove the logic board assembly
.
[* black] Insert wisdom hereCarefully lift the logic board assembly from its left side and work it out of the upper case, minding the optical drive cable and the I/O ports that may get caught during removal.
[* black] If necessary, use the flat end of a spudger to separate the microphone from the upper case.
[* black] Pull the I/O port side of the logic board away from the side of the upper case and remove the logic board assembly
.