Skip to main content

Changes to Step #3

Edit by Richdave

Pending approval

Deleted
Added
Unchanged

Step Lines

[* blackgreen] Gently pull the rubber end cap off the CCFL to expose the pins and solder joints
[* icon_caution] The CCFL are '''FRAGILE''' and will easily break
[* black] Now its a simple task of un-soldering each wire and soldering in the new CCFL
[* yellow] There is a little figure 8 rubber band tying the 2 CCFL together at their centre.
[* blackgreen] Gently pull the rubber end cap off the CCFL to expose the pins and solder joints
[* icon_caution] The CCFL are '''FRAGILE''' and will easily break
[* black] Now its a simple task of un-soldering each wire and soldering in the new CCFL
[* yellow] There is a little figure 8 rubber band tying the 2 CCFL together at their centre.

Image 1

Old Version

New Version

Image 2

No previous image

Added

Image 3

No previous image

Added