Skip to main content

Changes to Step #6

Edit by bsd

Pending approval

Deleted
Added
Unchanged

Step Lines

[* black] Use a spudger to flip up the white plastic hinged flap holding the remaining ribbon cable in place. The white tab will rotate up 90 degrees, releasing the ribbon cable.
[* icon_caution] This flap may be black or white. Be sure you are flipping up the hinged flap, '''not the socket itself'''. Note the position of the spudger in the image.
[* icon_caution] This flap may be black or white. Be sure you are flipping up the hinged flap, '''not the socket itself'''. Note the position of the spudger in the image.
[* black] Slide the black ribbon cable out of its connector, and remove the display assembly from the iPhone.