Skip to main content

Fix Your Stuff

Right to Repair

Store

Changes to Step #5

Edit by Byron Hoefer

Pending approval

Before
After
Unchanged

Step Lines

[* blackred] Remove the Torx screw that holds the display cable.
[* black] Pull out thinkthick display inverter board by pulling it up and out. Two tabs will be holding it in place, you need to get pass these to pull the board free.
[* blackred] Remove the Torx screw that holds the display cable.
[* black] Pull out thinkthick display inverter board by pulling it up and out. Two tabs will be holding it in place, you need to get pass these to pull the board free.