Skip to main content

Changes to Step #1

Edit by Aaron Fulton

Edit approved by Aaron Fulton


Step Lines

[* red] Remove all 14 of the 3.45 mm screws from the assembly.
[* black] Gently, insert plastic spudger into seam above the volume buttons of your phone.
[* icon_note] You may substitute metal spudger for plastic spudger to first start the opening of the seam. This may cause exterior cosmetic damage.
[* black] Slowly slide spudger around the device to release all the connectors internal to the device.
[* icon_note] During reassembly, ensure volume and power buttons align properly.