Skip to main content

Changes to Step #2

Edit by Kelsea Weber

Edit approved by Kelsea Weber


Step Lines

-[* black] Disconnect the ribbon cable in the top left corner of the device gently using the with the plastic opening tool for assistants.
+[* black] Use a plastic opening tool to lift the black flap on the ZIF connector located in the top left corner of the device.
+[* black] Once the connector is unlocked, pull the ribbon cable out with tweezers.
[* icon_note] This cable does not need to be completely removed, only one side is enough to allow the battery to be taken out.

Image 1

Old Version

New Version