Skip to main content

Changes to Step #2

Edit by Jovina Martinez

Edit approved by Jovina Martinez

Before
After
Unchanged

Step Lines

[* black] Insert spudger into the gap of the edge of the device where you want to start removing the screen.
[* black] Apply suction cup to corner of screen.
[* black] Lift suction cup to remove screen (you may need to have someone else hold the device down for proper leverage).
-[* icon_caution] A ribbon cable is attached to the back of the screen. Avoid lifting or moving the screen more than a few inches before you disconnect the ribbon cable or you may damage it.
+[* icon_caution] A ribbon cable is attached to the back of the screen. Avoid lifting or moving the screen more than 3-4 inches before disconnecting the ribbon cable or you could damage the device.