Skip to main content

Changes to Step #12

Edit by OuterSpaceHoppa

Edit approved by Adam O'Camb

Before
After
Unchanged

Step Lines

[title] Remove metal bracket securing on motherboard.
[* black] Peel off the tape.
[* red] Twist off 2 screws.
+[* black] Take care not to apply any lateral force to the motherboard to metal bracket electrical connector when removing the motherboard bracket. If abused, the tiny spring could break off at a later date and causing short circuits within the phone. The connector is to the right of the side button connector and above the copper film screened component.