Skip to main content

Changes to Step #6

Edit by Omar Cuevas

Edit approved by Omar Cuevas

Before
After
Unchanged

Step Lines

-[* black] Remove all four silver screws from the corners of the scanner glass cover with a T-10 torx screwdriver bit.
-[* icon_note] Remember where screws go. Mixing up screws can make reassembly difficult.
+[* red] Remove all four silver screws from the corners of the scanner glass cover with a T-10 torx screwdriver bit.
+[* icon_note] Organization is everything. Remember to have your iFixit magnetic work mat next to you. It will help keep screws organized and in place.