Skip to main content

Changes to Step #3

Edit by Omar Cuevas

Edit approved by Omar Cuevas

Before
After
Unchanged

Step Lines

-[* black] Underneath the control panel will be a flat grey ribbon cable attached at the base of the green control board with the other end of the cable located on the back side on the printer's base.
+[* black] Underneath the control panel will be a flat grey ribbon cable. This cable is attached at the base of the green control board with the other end of the cable located on the back side of the printer's base.
[* black] Carefully disconnect both ends of the flat grey ribbon cable to release the control panel in its entirety.