Skip to main content

Changes to Step #2

Edit by rolfe armstrong

Edit approved by Nick

Before
After
Unchanged

Step Lines

[* red] Once the control panel faceplate is off, look for the ***Lock/Unlock tab*** located underneath the off button.
-[* black] To unlock and release the control panel, insert the flathead 3/32" screwdriver into the tab and carefully push down. The control panel will then separate from the printer's base.
+[* black] To unlock and release the control panel, insert the flathead 3/32" screwdriver into the tab and carefully push down. The control panel will then separate from the printer's base by sliding it downward a little.