Skip to main content

Changes to Step #2

Edit by Omar Cuevas

Edit approved by Omar Cuevas

Before
After
Unchanged

Step Lines

-[* red] Use the same screwdriver to push down on the tab below the black start button.
-[* black] While holding down the tab, gently slide the control panel towards the front of the printer to remove it.
+[* red] Once the control panel faceplate is off, look for the ***unlock tab*** located underneath the ***off button***.
+[* black] Insert the small flathead screwdriver into the ***unlock tab*** and carefully push downwards, this will then release the control panel from the base.