Skip to main content

Changes to Step #1

Edit by Omar Cuevas

Edit approved by Omar Cuevas

Before
After
Unchanged

Step Lines

-[* black] Carefully wedge the small flathead screwdriver on the outer groove of the control panel faceplate.
-[* black] Follow the perimeter of the groove with the small flathead screwdriver making sure to gently pry and lift upward until the control panel faceplate comes off.
+[* black] Carefully wedge the flathead 3/32" screwdriver on the outer groove of the control panel faceplate.
+[* black] Follow the perimeter of the groove with the flathead 3/32" screwdriver making sure to gently pry and lift upward until the control panel faceplate comes off.
[* icon_caution] Take your time prying off the control panel faceplate. If too much pressure is applied, the control panel faceplate can break.