Skip to main content

Changes to Step #2

Edit by Ryan Dunn

Edit approved by Ryan Dunn

Before
After
Unchanged

Step Lines

-[* red] Remove the three screws from the flash switch side of the camera.
-[* icon_note] The size of the screws are as follows: top 2.5mm, middle 4.44mm, bottom 1.72mm
+[* black] Remove the following three screws from the flash release side of the camera:
+ [* red] One 2.5mm screw
+ [* orange] One 4.5mm screw
+ [* yellow] One 1.75mm screw

Image 1

Old Version

New Version