Skip to main content

Changes to Step #22

Edit by Chandler Mang

Edit approved by Chandler Mang

Before
After
Unchanged

Step Lines

[* red] Use the plastic spudger to remove the ribbon cable from the motherboard by placing the spudger under the ribbon cable connector and pulling up.
[* orange] Remove the 2.8mm screw from the motherboard.
[* icon_caution] Do not try to remove the motherboard from the camera yet.
[* black] Carefully rotate the motherboard upward.
-[* yellow] Use the plastic spudger to remove the ribbon cable from the bottom of the motherboard.
+[* yellow] Use the plastic spudger to remove the ribbon cable from the bottom of the motherboard by placing the spudger under the ribbon cable connector and pulling up.

Image 2

Old Version

New Version