Skip to main content

Changes to Step #22

Edit by Chandler Mang

Edit approved by Chandler Mang

Before
After
Unchanged

Step Lines

[* red] Use the plastic spudger to remove the ribbon cable from the motherboard.
[* orange] Remove the 2.8mm screw from the motherboard.
-[* yellow] Carefully rotate the motherboard up, then use the plastic spudger to remove the ribbon cable.
+[* black] Carefully rotate the motherboard upward.
+[* yellow] Use the plastic spudger to remove the ribbon cable from the bottom of the motherboard.

Image 1

Old Version

New Version

Image 2

Old Version

New Version

Image 3

Old Version

New Version