Skip to main content

Changes to Step #22

Edit by Ryan Dunn

Edit approved by Ryan Dunn

Before
After
Unchanged

Step Lines

-[* black] Use the plastic spudger to remove the ribbon cable from the motherboard.
-[* red] Remove the 2.8mm screw from the motherboard.
-[* orange] Carefully rotate the motherboard up, then use the plastic spudger to remove the ribbon cable.
+[* red] Use the plastic spudger to remove the ribbon cable from the motherboard.
+[* orange] Remove the 2.8mm screw from the motherboard.
+[* yellow] Carefully rotate the motherboard up, then use the plastic spudger to remove the ribbon cable.

Image 3

Old Version

New Version