Skip to main content

Changes to Step #21

Edit by Ryan Dunn

Edit approved by Ryan Dunn

Before
After
Unchanged

Step Lines

-[* red] Remove the two screws on the side of the camera with the three connector ports.
-[* icon_note] The top screw is 2.5mm and the bottom screw is 3.3mm
+[* black] Remove the following two Phillips screws from the side of the camera with the three connector ports:
+ [* red] One 2.5mm screw
+ [* orange] One 3.3mm screw
[* black] Remove the metal shield from the camera.

Image 1

Old Version

New Version