Skip to main content

Changes to Step #16

Edit by Chandler Mang

Edit approved by Chandler Mang

Before
After
Unchanged

Step Lines

-[* red] Remove the 3.5mm Phillips screw from the grey tab on the top of the camera.
+[* red] Remove the 3.5mm Phillips screw from the grey tab on the top of the camera with a Philips Head screwdriver.
[* black] Rotate the camera so the back panel is facing you.
-[* orange] Remove the 1.4mm Phillips screw from the sliver tab near the top of the camera.
+[* orange] Remove the 1.4mm Phillips screw from the sliver tab near the top of the camera with a Philips Head screwdriver.