Skip to main content

Changes to Step #16

Edit by Ryan Dunn

Edit approved by Ryan Dunn

Before
After
Unchanged

Step Lines

-[* red] Remove the 3.5mm screw from the grey tab on the top of the camera with the Phillips 000 Head screwdriver.
-[* black] Rotate the camera so you're facing the back panel.
-[* orange] Remove the 1.4mm screw from the sliver tab on top of the camera with the Phillips 000 Head screwdriver.
+[* red] Remove the 3.5mm Phillips screw from the grey tab on the top of the camera.
+[* black] Rotate the camera so the back panel is facing you.
+[* orange] Remove the 1.4mm Phillips screw from the sliver tab near the top of the camera.