Skip to main content

Changes to Step #12

Edit by Chandler Mang

Edit approved by Chandler Mang

Before
After
Unchanged

Step Lines

[* black] Use the flat end of the plastic spudger to rotate the black plastic locking tab towards the ribbon cable.
[* black] Insert the pointed end of the plastic spudger into a small hole on the side of the ribbon cable and pull the ribbon cable out of its housing.
+[* red] Use the flat end of the plastic spudger to pry the ribbon cable connector from the motherboard.
+ [* icon_note] Both ribbon cables should be removed after this step.

Image 3

No previous image

Added