Skip to main content

Changes to Step #10

Edit by Ryan Dunn

Edit approved by Ryan Dunn


Step Lines

-[* red] Remove the 2.9mm screw at the top of the silver plate as well as the 2.9mm screw at right side of the plate with a Phillips 000 Head screwdriver.
-[* orange] Remove the 1.8mm screw attached to the silver plate on the bottom face of the camera.
+[* black] Remove the following three Phillips screws securing the silver plate:
+ [* red] Two 2.9mm screws on the front of the camera
+ [* orange] One 1.8mm screw on the bottom of the camera
[* black] Lift the silver plate away from the camera.