Skip to main content

Changes to Step #10

Edit by Chandler Mang

Edit approved by Chandler Mang

Before
After
Unchanged

Step Lines

-[* red] Remove the 2.9mm screw at the top of the silver plate as well as the 2.9mm screw at right side of the plate.
+[* red] Remove the 2.9mm screw at the top of the silver plate as well as the 2.9mm screw at right side of the plate with a Phillips 000 Head screwdriver.
[* orange] Remove the 1.8mm screw attached to the silver plate on the bottom face of the camera.
[* black] Lift the silver plate away from the camera.