Skip to main content

Changes to Step #1

Edit by Kelsea Weber

Edit approved by Kelsea Weber

Before
After
Unchanged

Step Lines

[* red] Remove the two 4mm Hex screws that connect the grip to the camera with a Hex head screwdriver.
-[* black] Remove the two Philips screws to the left of the hex screws with a Philips Head screwdriver:
+[* black] Remove the two Phillips screws to the left of the hex screws with a Phillips head screwdriver:
[* orange] One 2mm screw
[* yellow] One 3mm screw
[* black] Remove the grip from the front of the camera by pulling it away from the lens and then away from the camera.