Skip to main content

Changes to Step #1

Edit by Chandler Mang

Edit approved by Chandler Mang

Before
After
Unchanged

Step Lines

-[* red] Remove the two 4mm screws that connect the grip to the camera with a Hex head 1.3 screwdriver.
-[* black] Remove the two screws to the left of the hex screws with a Philips 000 Head screwdriver:
+[* red] Remove the two 4mm Hex screws that connect the grip to the camera with a Hex head screwdriver.
+[* black] Remove the two Philips screws to the left of the hex screws with a Philips Head screwdriver:
[* orange] One 2mm screw
[* yellow] One 3mm screw
[* black] Remove the grip from the front of the camera by pulling it away from the lens and then away from the camera.