Skip to main content

Changes to Step #1

Edit by Ryan Dunn

Edit approved by Ryan Dunn

Before
After
Unchanged

Step Lines

[* red] Remove the two 4 mm screws that connect the grip to the camera with a Hex head 1.3 driver.
-[* black] Remove the grip from the front of the camera.
[* orange] Remove the two screws to the left of the hex screws with a Philips 000 Head driver.
[* icon_note] The top phillips head screw is 2mm and the bottom is 3mm.
+[* black] Remove the grip from the front of the camera.