Skip to main content

Changes to Step #1

Edit by Ryan Dunn

Edit approved by Ryan Dunn

Before
After
Unchanged

Step Lines

[* red] Remove the two 4mm screws that connect the grip to the camera with a Hex head 1.3 screwdriver.
-[* orange] Remove the two screws to the left of the hex screws with a Philips 000 Head screwdriver.
-[* icon_note] The top Phillips Head screw is 2mm and the bottom is 3mm.
+[* black] Remove the two screws to the left of the hex screws with a Philips 000 Head screwdriver:
+ [* orange] One 2mm screw
+ [* yellow] One 3mm screw
[* black] Remove the grip from the front of the camera by pulling it away from the lens and then away from the camera.

Image 1

Old Version

New Version