Skip to main content

Changes to Step #1

Edit by Chandler Mang

Edit approved by Chandler Mang

Before
After
Unchanged

Step Lines

[* red] Remove the 4 mm screws that connect the grip to the camera with a Hex 1.3 Head driver.
[* black] Remove the grip from the front of the camera.
-[* blue] Remove the two screws to the left of the hex screws with a Philips 000 Head driver.
+[* orange] Remove the two screws to the left of the hex screws with a Philips 000 Head driver.
[* icon_reminder] The top phillips head screw is 2mm and the bottom is 3mm.

Image 1

Old Version

New Version