Skip to main content

Changes to Step #1

Edit by Chandler Mang

Edit approved by Chandler Mang

Before
After
Unchanged

Step Lines

-[* red] Remove the 4 mm screws that connect the grip to the camera with a hex 1.3 driver.
-[* blue] Remove the two screws to the left of the hex screws with a Philips 000 head driver.
-[* black] Remove the grip from the camera.
+[* red] Remove the 4 mm screws that connect the grip to the camera with a Hex 1.3 Head driver.
+[* black] Remove the grip from the front of the camera.
+[* blue] Remove the two screws to the left of the hex screws with a Philips 000 Head driver.

Image 3

Deleted